UJI RANCANGAN JMF CAMPURAN AC-WC MENGGUNAKAN MARSHALL TEST DAN REFLUKS EXTRACTOR

Penulis

  • Rofi Budi Hamduwibawa Universitas Muhammadiyah Jember
  • Adhitya Surya Manggala Universitas Muhammadiyah Jember
  • Arif Wahyu Nurillah Universitas Muhammadiyah Jember

DOI:

https://doi.org/10.31949/jensitec.v10i01.7365

Abstrak

The level of asphalt is a significant factor to consider. The levels of asphalt used in paved mixtures serve asa basis for good performance production to a maximum life of road service. The study used tangible concrete mixed taral-the wearing course (latrines) that would be tested to reflux extractors in comparison with the Marshall's so that it would be known to match the levels of asphalt in the solution. Research USES materials from amps in jember county. Afterward, a mixed design takes into account the proportion of other ingredients. The next activity in which objects were developed was used by JMF (job mix formula), which would be tested at optimumnyam asphalt, by way of a Marshall test and testing through a reflux. Research shows that the Marshall test results have been found that at tar 4.5% - 7.0% vma value, stability, density, output for Marshall, and flow meets the specs. For the value of asphalt level effective only 4.5% of asphalt does not meet specs. Vfa only levels of asphalt 6.0% - 7.0% meet the specs. For a vim score only 7.0% of asphalt meets the specs. Testing for extraction level asphalt with external refluses, extracts obtained obtained multiple extractions with JMF tarips still meet the specification of +-0.3% tolerance based on 2018 general specs.

Kata Kunci:

Marshall test, Reflux Extractor, asphalt content

Unduhan

Data unduhan belum tersedia.

Referensi

Abdurrohim, Y., & Setyawan, A. (2017). Pembuatan Job Mix Formula Untuk Porus Aspal Dan Evaluasi Campuran Dari Penerapan Pada Jalan Lingkungan. 1296.

Direktorat Jenderal Bina Marga. (2018). Spesifikasi Umum 2018. Edaran Dirjen Bina Marga Nomor 16/SE/Db/2020, Revisi 2, 6.1-6.104.

Dwipayana, I. K. (2018). PERBANDINGAN KADAR ASPAL HASIL EKSTRAKSI PADA CAMPURAN ASPAL AC-BC

(Studi Kasus: Simpang Semarapura– Watu Klotok).

Hayati, N. N., Sulistyono, S., & Satryo, R. B. (2014). Perbandingan Hasil Uji Ekstraksi Campuran AC-BC Menggunakan Metode Refluks Dan Metode Sentrifus, 22–24.

Kamba, C. (2013). Pengaruh Penentuan Kadar Aspal Optimum terhadap Kualitas Desain Campuran Beraspal. Proceeding Seminar Teknik Sipil UKI Paulus Makassar, August, 87–95.

Kementrian Pekerjaan Umum. (2018). Pedoman Spesifikasi Teknis Campuran Beraspal Dengan Asbuton. Angewandte Chemie International Edition, 6(11), 951–952.

Maulana, Y., Sukirman, S., & Zurni, R. (2015). Studi Kadar Aspal Optimum Menggunakan Alat Marshall dan Alat Percentage Refusal Density. Jurnal Itenas, 2(1), 1–10.

Putri, L. D., Wiyono, S., & Puri, A. (2015). Kajian Kadar Aspal Hasil Ekstraksi Penghamparan Dan Mix Design Pada Campuran Asphalt Concrete Wearing Course (ACWC) Gradasi Halus, 2, 978–979.

RSNI M-01-2003. (2003). Metode Pengujian Campuran Beraspal Panas dengan Alat Marshall. Pustran-Balitbang PU, 1–18.

SNI 8279:2016 : Metode Uji Kadar Aspal Campuran Beraspal Panas dengan Cara Ekstraksi Menggunakan Tabung Refluks Gelas.

RSNI M-05-2004 : Cara Uji Ekstraksi Kadar Aspal dari Campuran Beraspal Menggunakan Tabung Refluk Gelas.

Tri, M. (2021). Pengaruh Kapur Sebagai Filler Pada Karakteristik Campuran Aspal Beton (AC-WC), 1–8.

Wirahaji, I. (2012). Analisis kadar aspal optimum laston lapis aus pada ruas jalan simpang sakah-simpang blahbatuh (studi kasus paket pemeliharaan berkala jalan tahun anggaran 2011). Jurnal Ilmiah Teknik Sipil, 16(2), 117–131.

Unduhan

Abstract Views : 115
Downloads Count: 34

Diterbitkan

2023-12-08

Cara Mengutip

Hamduwibawa, R. B., Manggala, A. S., & Nurillah, A. W. (2023). UJI RANCANGAN JMF CAMPURAN AC-WC MENGGUNAKAN MARSHALL TEST DAN REFLUKS EXTRACTOR. J-ENSITEC (Journal of Engineering and Sustainable Technology), 10(01), 915–922. https://doi.org/10.31949/jensitec.v10i01.7365

Terbitan

Vol 10 No 01 (2023): December 2023

Bagian

Articles

Lisensi

Hak Cipta (c) 2023 Rofi Budi Hamduwibawa, Adhitya Surya Manggala, Arif Wahyu Nurillah

Creative Commons License

Artikel ini berlisensiCreative Commons Attribution-ShareAlike 4.0 International License.

An author who publishes in the J-ENSITEC (Journal of Engineering and Sustainable Technology)  agrees to the following terms:

  1. Author retains the copyright and grants the journal the right of first publication of the work simultaneously licensed under the Creative Commons Attribution-ShareAlike 4.0 License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal
  2. The author is able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book) with the acknowledgment of its initial publication in this journal.
  3. The author is  permitted and encouraged to post his/her  work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of the published work