PENINGKATAN NILAI KUAT GESER BETON DENGAN MENGGUNAKAN FIBER LOKAL KAWAT BENDRAT BENTUK “U” DAN “Z” DENGAN 3 VARIASI CAMPURAN
indonesia
DOI:
https://doi.org/10.31949/jensitec.v8i02.2460Abstrak
Concrete is the main basic material used for planning and designing building structures and is widely used as a building material. One of the efforts to improve the unfavorable properties of the concrete in this case is to add bendrat wire fiber to the concrete mix. In this study, bendrat wire fibers in the shape of "U" and "Z" were used with variations in the addition of fiber in the concrete mix of 0.5%, 0.75% and 1% of the cement weight. The bendrat wire used has a length of 60 mm and a diameter of 1 mm. The test specimens were made in the form of a double-L beam with dimensions (200 x 150 x 300) mm as many as 21 pieces. Double-L beam testing was carried out at the age of 28 days using a Compression Testing Machine (CTM). From the results of the research, the highest shear strength of concrete was obtained in "U" shape bentrat wire fiber concrete with 1% bendrat wire percentage (BF3) with an average value of 6.00 MPa or an increase in concrete shear strength of 46.33% compared to Normal Concrete (BN). The value of the shear strength of the double-L beam with "U" shape bendrat wire fiber is higher than the value of the double-L shear strength beam with "Z" shape bendrat wire fiber although the difference in the shear strength value is not too significant. The addition of "U" and "Z" bentrat wire fibers can reduce cracks in the concrete.
Kata Kunci:
Concrete, Local Fiber, Bendrat Wire.Unduhan
Referensi
Gunawan. Pengaruh penambahan serat kawat bendrat pada beton ringan dengan menggunakan teknologi gas, UNS Surakarta, jawa tengah, 2015.
Irvan. penambahan serat kawat bendrat berbentuk “U” pada campuran beton.Universitas Riau, 2017.
Juanita, Juanita. "Peningkatan Nilai Kuat Tekan Dan Perbaikan Retak-Retak Pada Beton Dengan Menggunakan Fiber Kawat Bendrat Bentuk “Z” Dengan 3 (Tiga) Variasi Campuran." J-Ensitec (Journal Of Engineering And Sustainable Technology) 8.01 (2021): 619-623.
Ngudiyono, Metode Perbaikan Tegangan Geser Beton dengan Fiber Bendrat (Improvement Method Shear Stress Of Concrete Wit Bendrat Fiber).Universitas Mataram, 2012.
Nugraha ,Sigit, Giris Ngini, Penambahan kawat bendrat, 2010.
Suhendro , B., Pengaruh Fiber berupa Kawat bendrat Detjen DIKTI, Yogyakarta, 2020.
Tjokrodimuljo, K., Teknologi Beton, Nafiri, Yogyakarta, 1996.
Walid 2006, penambahan fiber bendrat Universitas Islam Al-Azhar Mataram, 2006.
Diterbitkan
Cara Mengutip
Terbitan
Bagian
Lisensi
Hak Cipta (c) 2022 J-ENSITEC (Journal Of Engineering and Sustainable Technology)
![Creative Commons License](http://i.creativecommons.org/l/by-sa/4.0/88x31.png)
Artikel ini berlisensiCreative Commons Attribution-ShareAlike 4.0 International License.
An author who publishes in the J-ENSITEC (Journal of Engineering and Sustainable Technology) agrees to the following terms:
- Author retains the copyright and grants the journal the right of first publication of the work simultaneously licensed under the Creative Commons Attribution-ShareAlike 4.0 License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal
- The author is able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book) with the acknowledgment of its initial publication in this journal.
- The author is permitted and encouraged to post his/her work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of the published work