EVALUASI PRODUKSI DAN PERSEDIAAN PADA PRODUK PIPA DI CV.XYZ
DOI:
https://doi.org/10.31949/jensitec.v10i02.9272Abstract
CV. XYZ is a distributor of building materials but focuses on PVC pipe products under the Target brand. CV. XYZ was founded in 2013. At CV. XYZ is very necessary for inventory scheduling which needs to be carried out by CV. XYZ in order to always meet consumer demand. The author suggests inventory calculations and scheduling to meet consumer demand using the Distribution Requirement Planning (DRP) method. In the DRP method there are several stages of data needed, namely demand data, inventory, lead time, holding cost data. Data processing in this DRP method is demand forecasting, determining Lead Time, determining lot size, calculating safety stock, and creating DRP tables. In the calculation results, results were obtained for distribution costs for 5 pipe products which initially had excess stock and could not meet demand. For Target Pipe AW 1.0 x 4m products savings of 33%, Target Pipe AW 2 ½ x 4m savings of 67%, Target Pipe C 5/8 x 4m savings of 67%, Target Pipe D 1 ½ savings of 50%, Target Pipe D 6.0 x 4m savings of 67%.
Keywords:
Distribution requirement planning, schedullingDownloads
References
HIDAYATULLAH, H. (2018). ANALISA SISTEM DISTRIBUSI PRODUK ALAT PENGEBORAN VALVE UNTUK WILAYAH KARAWANG DENGAN METODE DISTRIBUTION RESOURCES PLANNING (DRP).
MAHENDRA, R. (2019). PERENCANAAN DAN PENGENDALIAN BAHAN BAKU MENGGUNAKAN METODE MATERIAL REQUIREMENT PLANNING ( Studi Kasus Di PT. Cahaya Murni Andalas Permai ). Retrieved from https://ecampus.sttind.ac.id/sttind/AmbilLampiran?ref=2685&jurusan=&jenis=Item&usingId=false&download=false&clazz=ais.database.model.file.LampiranLain
Martono, R. (2015). MANAJEMEN LOGISTIK TERINTEGRASI. (Retnowati, Ed.) Penerbit PPM.
Martono, R. V. (2018). MANAJEMEN LOGISTIK. PT Gramedia Pustaka Utama, Jakarta.
Nugraha Kusuma Ningrat, E. A. (2023). PENERAPAN METODE DISTRIBUTION REQUIREMENT PLANNING (DRP) DALAM PENJADWALAN DISTRIBUSI PRODUK DI UKM SB JAYA CIAMIS. JURNAL INDUSTRIAL GALUH.
Nuraeni. (2021). IMPLEMENTASI METODE DISTRIBUTION REQUIREMENTS PLANNING (DRP) PADA PRODUK SARDEN AYAM BRAND CV. SURYA MEGAH PERKASA DI MAKASSAR.
Pujawan, I. N. (2010). Supply Chain Management. (I. k. Gunarta, Ed.) Guna Widya.
WICAKSONO, R. (2023). ANALISA DISTRIBUSI PRODUK DENGAN MENGGUNAKAN METODE DISTRIBUTION REQUIREMENT PLANNING DI CV. JAGO NIAGA SEMESTA.
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 Dinda Eka Putri Maarif
![Creative Commons License](http://i.creativecommons.org/l/by-sa/4.0/88x31.png)
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
An author who publishes in the J-ENSITEC (Journal of Engineering and Sustainable Technology) agrees to the following terms:
- Author retains the copyright and grants the journal the right of first publication of the work simultaneously licensed under the Creative Commons Attribution-ShareAlike 4.0 License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal
- The author is able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book) with the acknowledgment of its initial publication in this journal.
- The author is permitted and encouraged to post his/her work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of the published work