Perencanaan Instalasi Penerangan Jalan Umum Pada Jl. Sungai Kapih Kecamatan Sambutan Samarinda
Indonesia
DOI:
https://doi.org/10.31949/jensitec.v9i02.3615Abstract
The installation of public street lighting serves as a tool for road users when they are active at night and increases the safety and comfort of road users from crime or unwanted things and also complements the road that can be placed on the right / left or the middle of the road (median) as well. Planning for public street lighting on SungaiKapih road uses LED lights with a power of 60 watts with a protection index (IP) of 65 and has an efficacy of 5 lux which produces a light intensity of 605 Cd. The lamp poles used are galvanized iron poles, the type of lamp poles used is a single-arm octagonal lamp post with a height of 11 meters, installed on the right side of the road parallel to a distance of 40 meters as many as 35 poles. The source of electricity used in the planning of Jalan Sungai Kapih lighting is a source from PLN which is located around the location. The control system for planning the SungaiKapih road uses an automatic and manual system that is controlled by a photocell, contactor and selector switch. The purpose of installing this selector is so that the circuit can still be operated if the timer and photocell are damaged or not functioning and make it easier for related parties to carry out maintenance or repairs on street lights.
Keywords:
Penerangan Jalan Umum, Lampu LEDDownloads
References
Y. Yolnasdi, “Perencanaan Lampu Sorot LED untuk Penerangan Jalan Kartini Kota Bangkinang,” J. Surya Tek., vol. 5, no. 02, pp. 25–33, 2017, doi: 10.37859/jst.v5i02.641.
B. S. Nasional, “Spesifikasi penerangan jalan di kawasan perkotaan (Standar Nasional Indonesia 7391 :2008),” Sni 73912008, pp. 1–52, 2008.
UNESA, “Buku Pedoman,” Standar Kompetensi Lulusan, no. 31, pp. 1–34, 2012.
A. Effendi and A. Suryana, “Evaluasi Sistem Pencahayaan Lampu Jalan Di Kecamatan Sungai Bahar,” J. Tek. Elektro ITP, vol. 2, no. 2, pp. 86–94, 2013.
PUIL 2000, “Persyaratan Umum Instalasi Listrik 2000 (PUIL 2000),” DirJen Ketenagalistrikan, vol. 2000, no. Puil, pp. 1–133, 2000.
L. Djoko, “Penghantar listrik,” pp. 1–84, 2010.
N. Nurdiana, S. Al Amin, and A. Thohari, “Konversi Lampu Tl Ke Lampu Led ( Studi Kasus : Jakabaring Shooting Range Jakabaring Sport City Palembang ),” J. Ampere, vol. 3, no. 2, p. 135, 2018, doi: 10.31851/ampere.v3i2.2394.
N. N. Adisanjaya and M. Murna, “Rancang Bangun Sistem Lampu Penerangan Otomatis Menggunakan Sensor Light Dependent Resistor (Ldr) Untuk Menciptakan Konsep Kampus Hemat Energi (Studi Kasus :Universitas Dhyana Pura Bali),” Indones. Phys. Rev., vol. 2, no. 2, p. 57, 2019, doi: 10.29303/ipr.v2i2.21.
O. A. Rozak et al., “Pemasangan Sistem Kontrol Otomatis Lampu Penerangan Jalan di Kampung Tani Sengkol Muncul,” vol. 1, no. 4, pp. 282–291, 2022.
Muhaimin (2001). Teknologi Pencahayaan. (Bandung: Refika Aditama)
Published
How to Cite
Issue
Section
License
Copyright (c) 2023 Rizky Aprylianto Susilo
![Creative Commons License](http://i.creativecommons.org/l/by-sa/4.0/88x31.png)
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
An author who publishes in the J-ENSITEC (Journal of Engineering and Sustainable Technology) agrees to the following terms:
- Author retains the copyright and grants the journal the right of first publication of the work simultaneously licensed under the Creative Commons Attribution-ShareAlike 4.0 License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal
- The author is able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book) with the acknowledgment of its initial publication in this journal.
- The author is permitted and encouraged to post his/her work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of the published work