PERANCANGAN MESIN PEMANASAN INDUKSI UNTUK STEEL FORGING DENGAN TEMPERATURE CONTROLLER
Indonesia
DOI:
https://doi.org/10.31949/jensitec.v10i01.7341Abstract
Induction heating is a heating system that uses magnetic field induction generated from high frequencies. This process occurs with the presence of eddy currents or central currents whose circular direction surrounds the magnetic field that penetrates the object. Induction heating uses the principle of heating due to eddy currents produced by magnetic flux originating from coil windings that are electrified by alternating current (AC). Designing an induction heating machine, for the forging process which has the advantage of heating accuracy and a heating temperature that can be adjusted to reach a temperature of 800 ºC with a power of 1300 KW. Induction Heating Machine Design consists of Design Making which includes the frame, required voltage, circuit breaker circuit, power produced, Material Selection, Component Selection and Assembly. Induction heating machines use two power supplies, a copper coil
Keywords:
induksi panas, arus eddy, pemanasan permukaanDownloads
References
Porwo,wahyu 2013 .Rancang Bangun Pemanas Induksi Berkapasitas 600 W Untuk Proses Perlakuan Panas dan Perlakuan Permukaan Surakarta :Universitas Sebelas Maret (UNS)
Noviansyah, R 2012 Pemanas Induksi (Induction Heating) Kapasitas 200 Watt Cimanggis : Universitas Gunadarma
Jepri Wandes Nababan 2015 Rancang Bangun Pemanas Induksi Berdaya Rendah Dengan Menggunakan Selenoid Coil Berbasis Mikrokontroler ATMEGA 8535 Medan :Universitas Sumatera Utara
L. L. Faulkner 2017 Optimal Control of Induction Heating Processes Ohio : State University Colombus Taylor & Francis Group, LLC
Muhammad Firman Hakiki 2018 Rancang Bangun Induction Heater Berbasis Mikrokontroler ATMEGA 328 Surabaya :Universitas Negeri Surabaya
Dyah Riandadari 2018 Rancang Bangun Induction Heater Berbasis Mikrokontroler ATMEGA 328 Surabaya :Universitas Negeri Surabaya
Bagus Inggil Afrianto 2019 rancang bangun alat pemanas induksi untuk pengerasan permukaan baja surabaya : Institut Teknologi Sepuluh November
Published
How to Cite
Issue
Section
License
Copyright (c) 2023 Asep Rachmat, jajang nur hidayatulloh
![Creative Commons License](http://i.creativecommons.org/l/by-sa/4.0/88x31.png)
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
An author who publishes in the J-ENSITEC (Journal of Engineering and Sustainable Technology) agrees to the following terms:
- Author retains the copyright and grants the journal the right of first publication of the work simultaneously licensed under the Creative Commons Attribution-ShareAlike 4.0 License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal
- The author is able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book) with the acknowledgment of its initial publication in this journal.
- The author is permitted and encouraged to post his/her work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of the published work