PERANCANGAN ALAT UJI STATIS PROPELLER THRUST GAUGE UNTUK UAV LISTRIK SKALA KECIL

Indonesia

Authors

  • Yoan Ario Suwandito Universitas Singaperbangsa Karawang

DOI:

https://doi.org/10.31949/j-ensitec.v10i01.5803

Abstract

Static testing of the propeller is necessary to take into account the amount of thrust generated by the propeller before it is attached to the propulsion system. However, for small-scale static testing, especially on the Unmanned Aerial Vehicle (UAV) propulsion system, it is still difficult to find. So the purpose of this research is to design and manufacture a static test tool for propeller thrust combined with a DC brushless motor, especially in the Unmanned Aerial Vehicle (UAV) propulsion system. This test tool uses the Arduino Uno Atmega 328 as its microcontroller which is directly integrated with the load cell sensor which functions as the main measuring tool for the amount of thrust generated by the propeller rotation. In the load cell, there is a change in voltage in the strain gauge resulting in a change in resistance, then the results of the change will be read by the HX711 module. The HX711 module will convert the analog signal generated by the load cell into a digital signal, making it easier for Arduino to read data. Measurement results in data from Arduino will be displayed via the 16x2 LCD. This research proposes a simple propeller thrust gauge static test that can measure forces from 0 N to 49 N with an error rate of 0.479%.

Keywords:

thrust, Unmanned Aerial Vehicle (UAV), propeller

Downloads

Download data is not yet available.

References

Bilgehan, M. H., Mustafa, H. & Hakan, K., 2022. Estimation of UAV flight time and Battery Consumption for photogrammetric application using multiple machine learning algorithms. Engineering Research Express, Volume IV, pp. 2-3.

Cruzatty, C., Sarmiento, E., Valencia, E. & Cando, E., 2022. Design methodology of a UAV propeller implemented in monitoring activities. ELSEVIER Materials Today: Proceeding, Volume X, pp. 1-2.

Elghazali, A. & Dol, S. S., 2019. Aerodynamic Optimization of Unmanned Aerial Vehicle through Propeller Improvements. Journal of Applied Fluid Mechanics, Volume XII, pp. 1-3.

International Standard ISO 13342 (2019).

Martin, M. P. S. T., 2021. UAV Market. In: UNMANNED AERIAL VEHICLES: FUNDAMENTALS, COMPONENTS, MECHANICS, AND REGULATIONS. London: Nova Science Publisher, pp. 13-15.

Mehendale, N., 2023. Investigating the Battery Life Issues in Unmanned Aerial Vehicles: An Analysis of Challenges and Proposed Solutions. K. J. Somaiya College of Engineering, Volume IX, pp. 2-3.

Mukhammad, Y., Santika, A. & Haryuni, S., 2022. Analisis Akurasi Modul Amplifier HX711 untuk Timbangan Bayi. Jurnal Teknik Elektromedik Indonesia, Volume IV, p. 26.

Ozer, K. & Yilmaz, M., 2021. Design and Analysis of a High Power Density Brushless DC Motor for a Multi-Rotor Unmanned Aircraft. International Conference on Electrical and Electronics Engineering, Volume X, pp. 1-3.

Scanavino, M., Vilardi, A. & Guglieri, G., 2020. An Experimental Analysis on Propeller Performance in a Climate-controlled Facility. Journal of Intelligent & Robotic Systems, Volume V, pp. 3-4.

Wibowo, A. & Supriyono, L. A., 2019. ANALISIS PEMAKAIAN SENSOR LOADCELL DALAM PERHITUNGAN BERAT BENDA PADAT DAN CAIR BERBASIS MICROCONTROLLER. ELKOM, Volume XII, p. 1.

Downloads

Abstract Views : 194
Downloads Count: 168

Published

2023-12-08

How to Cite

Suwandito, Y. A. (2023). PERANCANGAN ALAT UJI STATIS PROPELLER THRUST GAUGE UNTUK UAV LISTRIK SKALA KECIL: Indonesia. J-ENSITEC, 10(01), 864–869. https://doi.org/10.31949/j-ensitec.v10i01.5803

Issue

Vol. 10 No. 01 (2023): December 2023

Section

Articles

License

Copyright (c) 2023 Yoan Ario Suwandito

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

An author who publishes in the J-ENSITEC (Journal of Engineering and Sustainable Technology)  agrees to the following terms:

  1. Author retains the copyright and grants the journal the right of first publication of the work simultaneously licensed under the Creative Commons Attribution-ShareAlike 4.0 License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal
  2. The author is able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book) with the acknowledgment of its initial publication in this journal.
  3. The author is  permitted and encouraged to post his/her  work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of the published work