PERANCANGAN ALAT MONITORING KONDISI LINGKUNGAN DAN PREDIKSI CUACA BERTENAGA SURYA BERBASIS MIKROKONTROLER MENGGUNAKAN METODE FUZZY LOGIC

Indonesia

Authors

  • Athalarvin Nabilfathin Arvin Universitas Pembangunan Nasional "Veteran" Jawa Timur
  • Rusindiyanto Universitas Pembangunan Nasional "Veteran" Jawa Timur

DOI:

https://doi.org/10.31949/jensitec.v9i01.2735

Keywords:

Monitoring tools, microcontroller, fuzzy logic

Abstract

Indonesia is an agricultural country where agriculture plays an important role in the overall national economy. This happens because agricultural and plantation products are influenced by environmental factors and supervision. This study aims to design a tool for monitoring environmental conditions and weather predictions with solar power as well as developing an IoT that connects weather monitoring and prediction tools with smartphones. So it is hoped that from the results of this study, a solar-powered monitoring and weather prediction tool can be made that can send the latest information related to environmental conditions to smartphones owned by farmers and other users. This research is using experimental method. Data processing carried out is fuzzification and defuzzification. Fuzzi inference according to Sugeno which is represented in the form of IF-THEN, where the system output is a constant or a linear equation. The results of this study found that the design of the environmental condition monitoring tool was successful in displaying data with an accuracy rate of 0.34% for the temperature variable, 0.19% for the humidity variable, and 0.83% for the irradiation variable, then the solar panel was able to charge power bank to generate sufficient electrical power for the device to operate continuously well in conditions such as in a research environment, as well as the IoT software developed to successfully display all data captured by the monitoring tool properly

Downloads

Download data is not yet available.

References

Aprianda, A., Hilda, A. M. and Prayitno, G. (2017) ‘Penerapan Logika Fuzzy Pada Alat Pengering Lada Otomatis Berbasis Mikrokontroler DHT-22’, Prosiding Seminar Nasional Teknoka, 2(2502), pp. I109–I116.

Dayanti, S. D. D. (2019) ‘Perancangan Pintu Otomatis Menggunakan Metode Fuzzy Logic Control’, Jurnal Pelita Informatika, 7(4), pp. 579–583.

Fikri, M. A., Erwanto, D. and Yuliana, D. E. (2018) ‘Rancang Bangun Alat Prediksi Kondisi Tubuh Ideal Menggunakan Metode Fuzzy Logic Sugeno’, Setrum : Sistem Kendali-Tenaga-elektronika-telekomunikasi-komputer, 7(1), p. 169. doi: 10.36055/setrum.v7i1.3409.

Hamzah, M. A. (2016) ‘Perancangan Alat Deteksi Tingkat Stress Dengan Metode Fuzzy Logic Berbasis Mikrokontroller Arduino’, Jurnal IT, 7(2), pp. 123–132.

Hidayati, I. N. and Suryanto, S. (2015) ‘Pengaruh Perubahan Iklim Terhadap Produksi Pertanian Dan Strategi Adaptasi Pada Lahan Rawan Kekeringan [The Effect of Climate Change on Agricultural Production and Adaptation Strategies on Drought Prone Land]’, Jurnal Ekonomi & Studi Pembangunan., 16(1), pp. 42–52.

Lubis, A. I. and Yetri, M. (2022) ‘Sistem Kendali Lampu Ruangan Menggunakan Metode Fuzzy Logic Dan Android Berbasis Mikrokontroler’, Jurnal Sistem Komputer TGD, 1(1), pp. 1–9.

Marzah, V. I. and Cahayahati (2020) ‘Perancangan Alat Proteksi Alus Lebih Digital Menggunakan Fuzzy Logic Aplikasi Modul Praktikum OCR’, Teknik Industri, 11(1), p. 2020.

Maulana, R., Ichsan, M. H. H. and Setyawan, G. E. (2018) ‘Implementasi Pengkondisian Kipas dan Lampu Otomatis Menggunakan Logika Fuzzy’, Jurnal Pengembangan Teknik Informasi dan Ilmu Komputer, 2(11), pp. 5301–5309.

Niam, B., Darpono, R. and Sabara, M. A. (2022) ‘Pengembangan Deteksi Suhu dan Kelembaban Laboratorium Elektronika Dengan Menggunakan Metode Fuzzy Logic’, CIRCUIT: Jurnal Ilmiah Pendidikan Teknik Elektro, 6(1), pp. 19–27.

Nuraisah, G. and Budi Kusumo, R. A. (2019) ‘Dampak Perubahan Iklim Terhadap Usahatani Padi Di Desa Wanguk Kecamatan Anjatan Kabupaten Indramayu’, MIMBAR AGRIBISNIS: Jurnal Pemikiran Masyarakat Ilmiah Berwawasan Agribisnis, 5(1), p. 60. doi: 10.25157/ma.v5i1.1639.

Prakoso, B. L., Singgih, H. and Pracoyo, A. (2020) ‘Sistem Pengaturan pada Ruang Proses Fermentasi Tape Menggunakan Metode Fuzzy Logic’, Jurnal Elektronika dan Otomasi Industri, 4(1), p. 44. doi: 10.33795/elkolind.v4i1.107.

Reynaldi and Octaviano, A. (2022) ‘Implementasi Metode Fuzzy Logic Dalam Perancangan Aplikasi Pemantauan Serta Kontrol Ph , Tds , Dan Suhu’, Journal of Artificial Intelligence and Innovative Applications, 3(2), pp. 98–104.

Ridia, A. K. and Hidayat, A. (2017) ‘Penerapan Metode Fuzzy Logic Pada Kursi Roda Elektrik Dengan Kendali Suara’, Seminar Nasional Sains dan Teknologi 2017, (November), pp. 1–8. Available at: jurnal.umj.ac.id/index.php/semnastek%0Ap-.

Samsudin, S., Ikhsan, M. and Ritonga, M. J. (2020) ‘Penerapan Logika Fuzzy Pada Sistem Peringatan Jarak Aman Sepeda Motor Berbasis Mikrokontroler’, Jurnal RESISTOR (Rekayasa Sistem Komputer), 3(2), pp. 114–119. doi: 10.31598/jurnalresistor.v3i2.657.

Sanca, P. A. (2018) ‘Perancangan Mesin Penyiraman Taman Menggunakan Fuzzy Logic’, Indonesian Journal of Engineering and Technology (INAJET), 1(1), pp. 28–34. Available at: https://journal.unesa.ac.id/index.php/inajet/article/view/5387.

Sugiyono (2014) Metode Penelitian Kuantitatif Kualitatif dan R&D. Bandung: Alfabeta.

Surapati, A., Zyaputra, A. and Rinaldi, R. S. (2021) ‘Perancangan Alat Pendeteksi Kualitas Minyak Goreng Dengan Parameter Viskositas Dan Densitas Mengggunakan Metode Fuzzy Logic’, Jurnal Amplifier : Jurnal Ilmiah Bidang Teknik Elektro Dan Komputer, 11(1), pp. 22–28. doi: 10.33369/jamplifier.v11i1.17133.

Surmaini, E., Runtunuwu, E. and Las, I. (2015) ‘Upaya sektor pertanian dalam menghadapi perubahan iklim’, Jurnal Penelitian, 30(98), pp. 1–7. Available at: http://www.ejurnal.litbang.pertanian.go.id/index.php/jppp/article/view/2480.

Downloads

Published

2022-12-05

How to Cite

Arvin, A. N., & Rusindiyanto. (2022). PERANCANGAN ALAT MONITORING KONDISI LINGKUNGAN DAN PREDIKSI CUACA BERTENAGA SURYA BERBASIS MIKROKONTROLER MENGGUNAKAN METODE FUZZY LOGIC: Indonesia. J-ENSITEC (Journal of Engineering and Sustainable Technology), 9(01), 701–707. https://doi.org/10.31949/jensitec.v9i01.2735