PERANCANGAN PRODUK CONVERTIBLE BAG DENGAN PANEL SURYA YANG ERGONOMIS MENGGUNAKAN METODE QUALITY FUNCTION DEPLOYMENT (QFD)

Indonesia

Authors

  • R A Atha Nabilla Rahmi Atha Universitas Pembangunan Nasional "Veteran" Jawa Timur
  • Mochamad Tutuk Safirin Universitas Pembangunan Nasional "Veteran" Jawa Timur

DOI:

https://doi.org/10.31949/jensitec.v9i01.2734

Keywords:

comvertible bag, product design, quality function deployment

Abstract

Technological advances in the field of Transportation, a socio-cultural truth that occurs in the community, that today the internet greatly affects citizens in undergoing activities in the community. The number of users of smart phones or smartphones, both on android and iOS systems makes people dependent on smartphones and the internet. Online motorcycle taxi drivers are required to have a mobile phone that can function properly and can be used throughout the day or during his work. This requires online motorcycle taxi drivers to bring their mobile phone cables and Chargers in order to continue receiving orders. Based on the above, there is an opportunity to make a convertible bag equipped with solar panels using the Quality Function Deployment (QFD) method. This study uses experimental methods. This study found that the final specifications of the bag are cheap, there are charging features, easy to store, convenient to use, have a large enough size, have good quality, and design that consumers want. Solar panels can charge a battery of 5,600 mah for one hour in bright sunlight conditions, with this figure can charge mobile phone batteries in general from 0% -100% less than 1 hour

Downloads

Download data is not yet available.

References

Alfonsius, A. (2020) ‘Pelayanan Transportasi Online Di Era New Normal’, Journal of Accounting and Management Innovation, 4(2), pp. 91–100. Available at: https://ejournal.medan.uph.edu/index.php/jam/article/view/395.

Ardani, F., Ginting, R. and Ishak, A. (2014) ‘Perancangan Desain Produk Spring Bed Dengan Menggunakan Metode Quality Function Deployment’, Jurnal Teknik Industri USU, 5(1), pp. 1–6.

Faizal1, A., Luthfianto2, S. and Nurwildani3, F. (2017) ‘Desain Pengembangan Produk Wallshelf Menggunakan Integrasi Qfd Dan Dfma Di Ud. Xyz’, Engineering, 15(2), pp. 11–16.

Fakhriyah, P. (2020) ‘Pengaruh Layanan Transportasi Online (Gojek) Terhadap Perluasan Lapangan Kerja Bagi Masyarakat Di Kota Cimahi’, Comm-Edu (Community Education Journal), 3(1), p. 34. doi:10.22460/comm-edu.v3i1.3719.

Iwan, A. (2018) ‘Rancangan Pengembangan Furnitur Kontemporer Dengan Menggunakan Metode Analytic Heirarchy Process ( Ahp ) Dan Quality Function Deployment ( Qfd )’, Teknik Industri, 2(2).

James Sahertian, G. et al. (2021) ‘Analisis Penerimaan dan Penggunaan Transportasi Online di Kalangan Pelajar Menggunakan Model UTAUT’, Jurnal TEKNO KOMPAK, 15(2), pp. 1–12.

Kasan, A. and Yohanes, A. (2017) ‘Improvement Produk Hammock Sleeping Bag Dengan Metode Qfd (Quality Function Deployment)’, Dinamika Teknik, 10(1), pp. 40–49.

Khoirul Anam, M., Nada Fitriah, S. and Saifuddin (2020) ‘Kontribusi Pengemudi Ojek Online (Grab) Dalam Pelayanan Masyarakat Di Kabupaten Malang’, Profit: Jurnal Kajian Ekonomi dan Perbankan, 4(2), pp. 1–15. Available at: https://ejournal.unuja.ac.id/index.php/profit.

Luh, N. et al. (2019) ‘Penerapan Metode Single Exponential Smoothing Dalam Peramalan Penjualan Barang’, Jurnal ENSISTEC, 3(2), pp. 433–441.

Muhammad and Fadilla, M. (2019) ‘Perancangan Desain Produk Alat Tulis Kantor Dengan Menggunakan Metode Quality Function Deployment’, Jurnal Techno-Fish, 2(1), pp. 1–2.

Nugroho Rizky et al. (2022) ‘Metalik: Jurnal Manufaktur, Energi, Material Teknik’, Metalik:Jurnal Manufaktur, Energi, Material Teknik, 1(1), pp. 39–45. Available at: http://https//journal.uhamka.ac.id/index.php/metalik.

Orshella, D.D., Inggit, F. and Asmoro, W. (2019) ‘Penerapan QFD dan DFA pada Perancangan Produk Tas Laptop Multifungsi’, Jurnal Media Teknik dan Sistem Industri, 3(1), pp. 22–29.

Pangestuti, N.I., Rusindiyanto, R. and Saifudin, J.A. (2020) ‘Perancangan Dan Pengembangan Meja Rias Yang Ergonomis Dan Multifungsi Dengan Metode Quality Function Deployment (Qfd) Di Surabaya’, Juminten, 1(6), pp. 157–169. doi:10.33005/juminten.v1i6.202.

Permana, E. and Desrianty, A. (2015) ‘Rancangan Alat Pengisi Daya Dengan Panel Surya ( Solar Charging Bag ) Menggunakan Quality Function Deployment ( Qfd ) *’, Jurnal Online Institut Teknologi, 03(04), pp. 97–107.

Saeful Nurochim, As’ad, N.R. and Rukmana, A.N. (2021) ‘Perancangan Produk Waistbag dengan Menggunakan Metode Quality Function Deployment (QFD)’, Jurnal Riset Teknik Industri, 1(1), pp. 1–13. doi:10.29313/jrti.v1i1.91.

Sugiyono (2017) Metodelogi Penelitian Kuantitatif Kualitatif dan R&D. Bandung: Alfabeta.

Tumuwe, R., Damis, M. and Mulianti, T. (2018) ‘Pengguna ojek online di kalangan mahasiswa Universitas Sam Ratulangi Manado’, Jurnal Holistik, (21), pp. 1–19.

Utami, E. (2018) ‘Perancangan Desain Kemasan Produk Olahan Coklat “Cokadol” Dengan Metode Quality Function Deployment’, JISI: Integrasi Sistem Industri, 5(2), pp. 91–100.

Zetli, S. and Kusbiantoro, H. (2017) ‘Perancangan Alat Bantu Angkat Brush Seal Welding Fixture dengan Metode Reba dan Qfd’, Jurnal Surya Teknika, 5(02), pp. 8–17. doi:10.37859/jst.v5i02.639.

Downloads

Published

2022-12-05

How to Cite

Atha, R. A. A. N. R., & Mochamad Tutuk Safirin. (2022). PERANCANGAN PRODUK CONVERTIBLE BAG DENGAN PANEL SURYA YANG ERGONOMIS MENGGUNAKAN METODE QUALITY FUNCTION DEPLOYMENT (QFD): Indonesia. J-ENSITEC (Journal of Engineering and Sustainable Technology), 9(01), 708–715. https://doi.org/10.31949/jensitec.v9i01.2734