Pelatihan Unit Kompetensi Mengoperasikan PLC SKKNI 631 Tahun 2016 untuk Guru Mekatronika SMK Negeri 10 Bekasi

Authors

  • Eka Samsul Maarif Universitas Muhammadiyah Jakarta
  • Budiyanto Universitas Muhammadiyah Jakarta, Jakarta, Indonesia
  • Husnibes Muchtar Universitas Muhammadiyah Jakarta, Jakarta, Indonesia
  • Machbubul W Universitas Muhammadiyah Jakarta, Jakarta, Indonesia

DOI:

https://doi.org/10.31949/jb.v4i1.3997

Abstract

One of the increasing needs for automation in the industrial world is the impact on the supply of skilled workers who are able to operate industrial automation systems, especially PLC-based systems. So that SMK as a formal educational institution must be able to meet this demand. The Community Service Program is carried out at SMK N 10 Bekasi in the form of training according to the Competency Unit to Operate PLCs to equip teachers to have competencies in accordance with the applicable SKKNI, in order the teachers can teach by referring to these standards. The results of the pre-test showed that the initial conditions of the 3 teachers had very good skills in understanding the work process flow of the automation system, being able to read wiring diagrams, being able to make installation connections on the PLC according to the drawings, being able to operate the PLC and being able to test the system. However, the quality of the cable and the installation of terminals still has many errors. The results of the post test showed that the training was able to reduce the average number of errors from 15 to 5.33 or decrease 64.46% and reduce the average installation time of connecting cables from 73.66 to 53.55 or decrease 27.3%.

Keywords:

training, PLC installation, SKKNI, Industrial Automation

Downloads

Download data is not yet available.

Downloads

Abstract Views : 178
Downloads Count: 359

Published

2023-01-10

How to Cite

Maarif, E. S., Budiyanto, Muchtar, H., & Machbubul W. (2023). Pelatihan Unit Kompetensi Mengoperasikan PLC SKKNI 631 Tahun 2016 untuk Guru Mekatronika SMK Negeri 10 Bekasi. BERNAS: Jurnal Pengabdian Kepada Masyarakat, 4(1), 219–228. https://doi.org/10.31949/jb.v4i1.3997

Issue

Vol. 4 No. 1 (2023)

Section

Articles

License

Copyright (c) 2023 Eka Samsul Maarif, Budiyanto, Husnibes Muchtar, Machbubul W

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

An author who publishes in the BERNAS: Jurnal Pengabdian Kepada Masyarakat agrees to the following terms:

  1. Author retains the copyright and grants the journal the right of first publication of the work simultaneously licensed under the Creative Commons Attribution-ShareAlike 4.0 License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal
  2. The author is able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book) with the acknowledgment of its initial publication in this journal.
  3. The author is  permitted and encouraged to post his/her  work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of the published work