THE EFFECT OF VARIATION OF WELDING CURRENT ON 6061 ALUMINUM PIPE ON MECHANICAL PROPERTIES AND MICRO STRUCTURE USING TIG WELDIN
DOI:
https://doi.org/10.31949/jmm.v2i2.4364Abstract
Abstract
TIG welding is a welding technique for connecting metals using tungsten rod electrodes and using noble gas as a protective gas which is exhaled on the weld metal to protect against contamination with the surrounding atmosphere. Aluminum metal is a metal that has a high affinity for absorbing H2, N2 and O2 in the air at high temperatures, so it is necessary to have a high purity protective gas during the welding process, because N2 H2 and O2 will cause a decrease in the corrosion resistance of the material. To find out the effect of the TIG welding process on the mechanical properties and microstructure, a study was carried out to determine the mechanical properties, namely hardness, and bending properties, as well as the microstructure found in aluminum after the tungsten inert gas welding process was carried out using current. different. In this study the welding process used the Tungsten Innert Gas process by varying the welding current, namely 100 A, 130 A and with a welding time of 2.5 seconds, 4.5 seconds, . So that from the welding parameters used, it will be known the effect of the welding parameters
Keywords : Welding Current, Alumnium Metal, TIG welding
Keywords:
Welding Current, Alumnium Metal, TIG weldingDownloads
References
Reference
N. U. P. K. C. D.K. Pratiwi1*, "Pengelasan Smaw Baja Karbon Rendah Dengan Yang Di Quenching Dan Normalizing," Fakultas Teknik Universitas Sriwijaya, 2017.
I. B. Cahya Sutowo, "Analisa Pengaruh Pengelasan Tig dan Mig pada Sambungan Las dengan Material Tipe Ss316 dan Ss304," Universitas Muhammadiyah Jakarta, Jurusan Teknik Mesin, 2008.
S. M. Rudi Siswanto, Buku Ajar Teknologi Pengelasan, Banjarmasin: Program Studi Teknik Mesin Fakultas Teknik. Universitas Lambung Mangkurat, 2018.
M. T. Q. Amin Nur Akhmadi1, "ANALISA HASIL PENGELASAN 2G DAN 3G DENGAN BAHAN PLAT BESI ST 40 KETEBALAN 10MM DAN VOLTASE 20 - 35 MENGGUNAKAN MESIN LAS MIG," Journal Mechanical Engineering, Politeknik Harapan Bersama, , Vols. 9, No 2, 2020.
S. M. I. S. M. Mulyadi, Teknologi Pengelasan, Sidoarjo: Universitas Muhammadiyah Sidoarjo, 2020.
B. H. K. A. S. Mohruni(1), "Pengaruh Variasi Kecepatan Dan Kuat Arus Terhadap Kekerasan, Tegangan Tarik, Struktur Mikro Baja Karbon Rendah Dengan Elektroda E6013," Jurusan Teknik Mesin, Fakultas Teknik, Universitas Sriwijaya.
Z. T. R. Saifuddin A.Jalil1, "ANALISA KEKUATAN IMPAK PADA PENYAMBUNGAN PENGELASAN SMAW MATERIAL ASSAB 705 DENGAN VARIASI ARUS PENGELASAN," Jurnal Polimesin, Vols. 2, Nomor 2, 2017.
