Reconditioning Load Cell Tensile Testing Machine Capacity 2 Ton
Abstract
Test equipment is an educational laboratory facility that is very important in supporting and supporting the
teaching and learning process in the laboratory. , load cell is an electronic device that is used as an
additional device in a tensile testing machine. The tensile test results will be better or more accurate if the
tensile test equipment is equipped with a load cell using a data device system.
Obtained from this test, namely the stress value that occurs in the load cell, the stress on the ST37 steel
specimen is 48.56 kg/mm², the maximum stress is 952.99 kg/mm². While the stress on the 6061 aluminum
specimen is 15.6 kg/mm², and the maximum stress is 306.15 kg/mm². In addition to the workpiece that
breaks due to
tension, a tensile test curve is also generated. This curve is a description of the workpiece loading process
from the beginning of the withdrawal to the end of the workpiece.
Keywords:
Tensile Tes, Load cell, Aluminum 6061, stress, strainDownloads
References
Sri Wahyuni Sitorus, Ajat Sudrajat, Kiki Rezki L. 2018. Rancang Bangun Load Cell Kapasitas 20 kN
Untuk Beban Kerja Tarik dan Tekan. Jakarta : Program Studi Teknik Fisika, Fakultas Teknik
dan Sains, Universitas Nasional.
Haris Budiman. 2016. ANALISIS PENGUJIAN TARIK (TENSILE TEST) PADA BAJA ST37 DENGAN
ALAT BANTU UKUR LOAD CELL. Majalengka : Teknik Mesin, Fakultas Teknik Universitas
Majalengka.
Engkos Koswara. Perancangan Mesin Uji Tarik Dengan Menggunakan Load Cell 1000 kg , Fakultas
Teknik Universitas Majalengka
Jamaludin. 2018. ANALISA PERHITUNGAN DAN PEMILIHAN LOAD CELL PADA RANCANG BANGUN
ALAT UJI TARIK KAPASITAS 3 TON. Tangerang : Program Studi Teknik Mesin, Fakultas
Teknik, Universitas Muhammadiyah Tangerang.
Callister jr, William D. 2007. Fundamental of material science and engineering an integrated
approach. The university of utah.
Emira Eldina Ihsan, Gusdikal Candra, Nandi Firdaus. 2016. ALUMINIUM. Jurusan Kimia, Universitas
Negeri Padang.
Teddy, Suryosambodho. 2013. Beban dinamik.